The Isolated splitter converterDAT5022 is designed to provide two output voltage or current signals proportional to the value of the input signal.
The user can program the input and outputs ranges by the DIP-switches available after opening the door located on the side of the device .
The regulation of zero and span values is made by the ZERO and SPAN potentiometers located on the top of device.
The DAT5022 is accurate to 0.1% full scale and has less than 0.01%/'f thermal drift.
The DAT5022 provides on the input side an auxiliary supply source to power up a loop. It also provides an auxiliary power supply source on the output side so both active and passive loads can be connected.
It is possible to set the minimum and maximum values of the input and output ranges in any point of the scale, keeping the minimum span shown in the table below.
The DAT5022 is isolated between the power supply and the input/output to 2000V, eliminates the effects of any ground loops and allows the use of the transmitter in heavy environmental conditions found in industrial applications.
The DAT5022 is in compliance with the standard 89/336/CEE on the Electromagnetic Compatibility.
The DAT5022 is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.
