DAT1135 Head Mount Temperature Converter

Your Price: $105.00

DAT1010

Part Number: DAT1135

Availability: In Stock

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity

Description

The DAT1135 Temperature converter is a Thermocouple Head Mounted Temperature converter. The output is 0-10 volts with the minimum span being 1 V, so all the standard outputs are possible, 0-10V, 1-5V and 2-10V. The input accepts Thermocouples, RTD's, mV's, Potentiometers and resistance inputs. The DAT1135 is programmable by a PC using the Prodat and the DATASOFT software. The sensor, range, zero and linearization are programmable. The input is measured, linearized and converted to the industrial standard. The RTD and resistance input have the added feature of selecting 3 or 4 wire for higher accuracy. There is a burn out failure alarm that can be programmed to drive the output signal High and Low. The input on the DAT1135 has a high range of tolerance and the DAT1135 can accept any voltage between 10 V and 32 V. The thermocouple selection type is J, K, S, R, B, E, T and N. The RTD sensor is selectable for Pt100, Pt1000, Ni100 or Ni1000. The resistance input is selectable from 0-200, 0-500, 0-2000 Ohms. The mV input is selectable from -100mV to 700mV with a minimum span of 2 mV. The Potentiometer can accept resistance in the range of 0-200 Ohms, 200-500 Ohms and 0.5 to 2 kohms. The RTD and resistance can be 2 wire or use compensation wire to improve accuracy i.e. 3 or 4 wire.

CVPROG programming Cable

$53.00

1 Week Delivery.

Buy

DAT1135 Head Mount Temperature Converter

Related Items